How to make a crazy hat? in just 10 minutes

What’s more fun than a hat? It is a versatile accessory, it can be a formal piece at the same time. and something fun and informal in another That’s why we’re going to show you how to make a crazy hat in just 10 minutes, with different materials, themes and shapes to please the youngest and the oldest in the house.

Table of Contents

How to make a crazy hat?

To make a crazy hat requires a lot of creativity, because that is the difference between a crazy hat and a conventional one, the level of creativity in colors, details and designs. Also, you won’t need much, just what surrounds you. How to make a crazy hat with recycled material? There are many ways, among them, to make one of the simplest and most functional, you will need…

The materials to be used;

Cardboard (you can use corrugated or normal cardboard boxes)
White sheets
Scissors
hot silicone
Cutter
Measuring tape
cold paintings
plastic flakes
Elements to decorate (stones, ribbons, glitter, colored paper…)

Step 1: Draw a picture of the idea you have in mind✔

Before you start, you need make a sketch to get an idea how to decorate and what to have.

Step 2: Measure your head circumference✔

Measure the circumference of the head of the person to whom the hat is directed with the help of the tape measure

Step 3: Draw a circle on the cardboard✔

Based on this head measurement, start drawing the circumference on the cardboard, then you will draw a larger one, parallel to it, for this you can extend about 5 or 10 cm on each side.

Step 4: Draw a rectangle✔

On another cardboard draw a rectangle the height of the rectangle will determine the height of the hat and the width has to be the measurement given by the circumference of the head plus a few centimeters to paste.

Step 5: Proceed to cut the pieces✔

Cut all the pieces there will be a ring, a circle and a rectangle at the end . The ring represents the brim of the hat, the circumference is the top of the cup, and the rectangle is the cup itself. This way you will glue the pieces together.

Step 6: Glue the pieces✔

After gluing the pieces, line the entire hat with white sheets .

Step 7: Customize the hat✔

to paint in the shades you want.

Step 8: Place creative elements✔

Use the plastic cups to make fringe. or to give different heights in the brim of the hat. Decorate to your liking .

How to make a crazy hat for children?

There is nothing more fun than making a crazy hat, especially if it is a children’s party.

The first thing is to find some material such as bond paper or newspaper to make the mold and we start by taking the diameter of the child’s head with a tape measure, this I will give you the measurements of what you are going to do.

Step 1: Using the measure the diameter, measure the circumference of the base of the hat on the paper Starting from the line and with the support of the tape measure, make stitches in a larger diameter considering the size of the brim of the hat that you are going to make.

Step 2: You must think about the shape of that hat, if it’s a magician or just a spinning top, you must offer the space by creating a spinning top circle wide enough to give grace and effect to what you want to do. Cut and save your pattern.

You may be interested in reading about…

How to make an invoice? 👈

Step 3: You must form a rectangle taking into account the measure of the circumference given by the diameter of the child’s head . This should be two to three centimeters longer to be able to join and make the cone.

Step 4: You must add an inch and a half to the measurement of the sides of the edges Make a notch on the sides of the wing disk joint that allows you to easily join the cone to the disk. We have the pattern for the brim of the hat and the body of the hat .

Step 5: right away We place the disc of the hat on the paper and with a pencil we mark the inside of the diameter of the head and add another half centimeter.

Step 6: Let’s ride! With our cardboard sheet or recycled cardboard or thick fabric with support we set all our standards and mark each very carefully . For that we can help ourselves with clothespins or sewing pins in the case of fabric and cut all our pieces.

Step 7: We put glue or special glue for fabric in the cone tabs that we must fold and insert the disc trying to be as careful as possible. Then we put the top of the hat folding the wings inside and putting the glue.

Step 8: We fix the glass and wait for it to dry we can speed up the process with a hair dryer. Finally we clean the edges by trimming the excess and we can sand a little.

Step 9: A kids will love helping out and customizing their hats by giving them they shapes and Colors or necessary applications to make them much more original.

Step 10: A little trick for you do not bother the forehead and settle better in the head is put a rubber strip to fill the cushion .

How to make a crazy hat for girls?

What better hat for girls than crowns? They are the princesses of our days, so I’m going to show you how to make a crown to wear as a hat.

Materials you will need;

matte cardboard
Scissors
Silicone
sparkling letters
imitation diamond

Step 1: Cut a rectangle, the length corresponds to the circumference of the head and the width at the height you want the crown to be.

Step 2: In one side, make zigzag cuts to simulate the tips of the crown.

Step 3: glue on the ends forming a circle .

Step 4: Put the letters with the name of the princess in front of the crown.

Step 5: decorate with stones and hot silicone. Set up!!!

How to make a crazy paper hat?

Paper It is an excellent material to make a crazy hat, we’ll show you how to make a paper sailor hat, then add some crazy color and other elements.

Step 1: Fold a sheet of paper in half, then fold it lengthwise again.

Step 2: Run your fingernail along the entire crease and proceed to unfold the paper this fold will serve as a guide.

Step 3: Now Fold the paper in half widthwise and join the narrow ends and then flatten the paper leaving a piece of layers. Also in the fold, pass the nail to fix it and do not unfold the paper.

Step 4: Now you need to bend the top corners towards the center of the fold.

Step 5: Rotate the piece so that the edge that folds over is placed on the top of part.

Step 6: Fold the top corners toward the vertical crease and go to the center of the sheet of paper. In the end, it will be like a picture of a house.

Step 7: Of the two flaps or layers, take one of them and fold it so that the new fold is aligned with the lower folds corresponding to the triangles.

Step 8: Flip the piece over and now fold the second flap or layer up.

Step 9: paste each of the corners of the flap if you want it to be more firm, or with glue, you can also do it on the side edges of the flap to keep them together.

Step 10: Open your hat and now decorate it with paints, with stickers, with any element that gives it that crazy and different character.

Crazy Hats for Kids – Make a Cozy Kids Hat for Parties

Step 1: party times are the most remembered by our children so making comfortable hats will allow them to get in the mood and have the most fun. For that, you will need foam, DIY tools, decorations and creativity .

Step 2: draw two circles on an EVA foam sheet. One the size of the circumference of the head and the other should be twice that size.

Step 3: Continue also cutting a rectangle in EVA foam the length will represent the height of the hat and the width should fit the smallest circumference you cut in the previous step.