It is normal to see in movies and in some animes the use of ninja stars either as an attack or for defense, they are infallible weapons in the complements of these characters since they are usually the most used.
Of course, it is natural for adults and children to be intrigued by these weapons, some can be found in steel Weather others are made of plastic allowing them to play with ease.
But of course, they can often be tricky to get your hands on, as they can’t be found in every toy store, and that’s why. what is worth learning make a paper shuriken .
These allow the children play with ease Well, while it is true that paper can also harm them, the risk is much lower than playing with anything else.
In addition, the material It allows be personalized either all black or just color that children prefer since your imagination is the one that commands when these types of activities are carried out.
How to make a 6-pointed paper shuriken?
With a little focus and dedication it can be an easy job to make a 6 pointed shuriken keep in mind that if you get desperate, it can also present a little more complexity, because it has a greater number of points, but with a little patience and following these steps will be easy :
Step 1.- Cut a square and fold it into a triangle
You should have a 20 x 20 cm square. With the square a triangle is made right in the middle, then it must be folded again in the form of a triangle on it, it is unfolded and it is folded again.
Step 2.- Bring the corners to the opposite side
Having the first triangle, the left corner must be brought to the opposite side, the same is done with the other side.
Step 3.- Fold the corners
The two corner points are folded back, the top one is also folded, but to the opposite side.
Step 4.- Fold the shuriken using the folds
Unfold everything again, begin to fold the ends according to the folds, fold in half, follow the fold guide. Through the folds, the entire structure begins to fold, and it will be ready.
How to make a 5-point paper shuriken?
In most cases, to be successful with origami you must have a little patience because it is normal that not everything goes well at first, so, to make a 5 pointed paper shuriken, it’s advisable follow the instructions below:: _
Step 1.- Fold a sheet in half and then in the form of a triangle
In a square sheet it is folded in half, the left corner is folded in the form of a triangle to the right, the same is repeated with the other side.
Step 2.- Fold the right corner on itself
In the center of the fold, the lower right corner is brought, this corner is folded over on itself, and the upper part must be attached to it.
Step 3.- Cut the excess and open the paper
It is folded in half and the remaining fold is trimmed. The paper should then be reopened and it will be in the shape of a pentagon.
Step 4.- Fold and unfold the corners to make the star
Each corner is folded in half and then unfolded again. With the help of the folds, the star begins to assemble.
Step 5.- Fold the corners over them and voila!
All the corners are brought to the center and will be folded on themselves, having the star ready.
How to make a 3 point Shuriken paper?
They exist different types of stars some may have more points than others it all depends on what you can do as well as what you want to do of course the bigger it is, the more paper it will require .
This type of stars can be made with both cardboard and sheets of paper, ideally is that the chosen material can be easily molded because that way it will not cost you so much to get the design you are looking for.
in case you want make a 3 pronged paper shuriken, The first thing to have on hand is enough paper, in case we make a mistake in the process, once you have it, it’s a matter of starting to do it:
Step 1.- Fold and cut the sheets so they are square
Three sheets are needed, the first one must be removed, and one triangular end will be bent to the other. There will be a rectangle at the bottom, you need to continue cutting it. In this way the sheet will be completely square, the same process must be repeated with all three.
Step 2.- Fold the leaves in the shape of a triangle
When ready, the sheet must be folded again from one end to the other so that a triangle remains.
Step 3.- Take into account the direction when turning
When the sheets are folded, it is important to take care that they all go in the same direction.
Step 4.- Fold the lower triangle
At the bottom edge there will be a smaller triangle, which also needs to be folded.
Step 5.- Fold the triangle again
Then another fold is made on itself in the shape of a triangle, in this way there will be no part of the paper that stands out.
Step 6.- Assemble the ends of the Shuriken
Once the process is done with the three, they must be assembled, they are placed so that it looks like a triangle.
Step 7.- Assemble the ends of the shuriken
In the back there is a kind of pocket that is where they will be mounted and ready.
How to make an 8-pointed paper shuriken?
As more points are added to a star, it is normal for the complexity to increase, so make an 8 point paper shuriken It can be a bit complex, but you must follow these steps :
Step 1.- Fold 4 sheets in the shape of a triangle
Have 4 square sheets that are split in half, bring one side to the center line that was marked with the first fold, do the same on the other side.
Step 2.- Fold the top and bottom
Then part from top to bottom so that both parts are one on top of the other. The upper and lower ends fold in on themselves.
Step 3.- Fold back to the center
Top folds over center line, bottom folds over.
Step 4.- Flip it over to form another triangle
The design is turned over and the left end is lowered, the same with the other side, they will form a triangle. It is necessary to repeat the same procedure with the other three sheets.
Step 5.- Angle of 90 0 of the first and second pieces
The first piece must be straight, just like the second, the second is rotated and rotated 90º and mounted on top of the first.
Step 6.- 90 0 of the third piece in relation to the second
The third is removed and placed in the same way as the first and is rotated 90º in the second.
Step 7.- Follow the clock
The tabs must be lowered clockwise, the star must be rotated.
Step 8.- Fourth tab at 90 0 of the third and voila!
At the rear, the fourth sheet is placed and rotated 90º, then the flaps begin to descend clockwise. And the star will be ready.
How to make a 4-pronged paper shuriken?
Make a 4-pronged shuriken may be easier than the rest since it doesn’t have as many points, but It is recommended to follow the following steps :
Step 1.- Find two squares of paper
You should have two squares of paper that can be different colors.
Step 2.- Fold the sides towards the center and in half
It is necessary to fold each one in half, one side is brought to the center line that was marked with the first fold, the same must be done on the other side. The upper and lower ends fold in on themselves.
Step 3.- Fold the top and bottom
Top folds over center line, bottom folds over.
Step 4.- Turn and form a triangle with the ends
The design is turned over and the left end is lowered, the same with the other side, they will form a triangle.
Step 5.- Assemble the pieces in opposite directions
Once ready, it is time to assemble it, you must place one on top of the other in opposite directions, because thanks to the fold they will have a kind of pocket.
Step 6.- Fold the ends in a clockwise direction
The whores need to be folded clockwise and placed in the pockets so that the paper is tight and ready for use.
For more information on the developing any toy or game you want to make yourself keep going visiting our website We will continue to document it with updated and varied content.
