Many times build things It is not as simple as you think since it will depend on the necessary materials and of course it is important to have the necessary tools to be successful on that task.
in case you want make a rocket There are a few factors that go into your success, as it’s important to make it clear that maybe the materials for what you want may be a bit difficult to come by.
And so that there are different options that make this job much easier, the first thing to do is determine is the type of rocket you want, because the necessary materials to collect will depend on it.
Of course, some rockets can be a bit more complex than others, but it is possible to explain to the little ones in the house how rockets work with materials that can be found at home without having to spend additional money.
How to make a rocket?
When watching movies, most children dreams of going to space or be an astronaut when they are older, either because space arouses their curiosity or simply because they see it as a challenge in which they do not know how many problems there are. .
If you change your mind when you grow up, it’s good to be motivated by your creative side. make space rockets some can draw them or decorate the room with a space theme, but nothing better than making something with their own hands.
The process can be simple. If you have a little patience, it is also easier to explain to the little ones what an astronaut does or what it takes to go to space.
Materials needed to make a rocket. ;
rolls of toilet paper
Sheets of white paper or cardstock
Scissors
Card
Tail
colored markers
Once you have all the materials available, you should follow some simple instructions To be successful in performing this type of activity:
Step 1.- Cover two rolls of toilet paper with more paper
Take two rolls of toilet paper, placing them one on top of the other, then both of them will be covered with the sheet of paper.
Step 2.- Adjust and secure with tape or glue
It should be tight, but without creasing the rolls, it can be closed at the end with tape or a little glue.
Step 3.- Form a cone with another roll of paper
Then another roll of paper should be taken and cut in half to form a cone.
Step 4.- Reinforce the corners and try to fit one of the ends of the rocket
Once the cone is ready, the corners must be reinforced with glue, it is measured with one end of the arugula and the excess is cut to size.
Step 5.- Measure the wings of the rocket
With the cone ready, it is time for the wings, measures must be taken to make them comfortable.
Step 6.- Cut the cardboard wings and paint them
The wing mold is made of cardboard and must be painted with markers on both sides.
Step 7.- Fit the cone in the rocket and on the other side make some cuts
The cone is glued to the top of the rocket, then 3 cm openings are made at the bottom.
Step 8.- Attach the wings to the rocket
Its wings will be placed in the openings at the bottom, once everything is ready it can be painted or simply decorated with adhesive tape.
How to make a water rocket?
Making a water rocket can be a good idea when you have bored little ones at home since this allows, through an experiment in which adults and children have fun, some fundamentals of physics can be explained.
This rocket consists of an impulse that gives it water, so it is capable of going up, of course, at this point it is important to explain to the little ones that the the water must have pressure strong enough to lift the rocket. object in question.
For those kids who can be a bit tricky when it comes to Newton’s Laws, using this experiment is very useful because in a practical way it may be a little easier for them to visualize the concepts.
Materials you will need to make a water rocket;
A plastic bottle of approximately two liters.
an inflator
cork
Water
A base for the rocket to stand on
Once you have all the elements located, you can start making the rocket. following some simple instructions :
Step 1.- Fill the bottle with water and place the inflator nozzle
The bottle should be half full of water. Once ready, the cork must be placed in the bottle spout, through the cork the inflator spout must be inserted.
Step 2.- You must bear in mind that…
This will basically be the system that will generate the necessary pressure so that it can be considered a rocket.
Step 3.- Turn the bottle and place it vertically
The bottle must be placed with the cork down, it must remain in this position, so the base on which it will stand is needed here.
Step 4.- Fill the bottle with air so that the rocket flies
Then, with the inflator, air is introduced into the bottle, the more air, the greater the explosion of the rocket.
How to make a paper rocket?
There are different ways to make a rocket, since some can be simply decorations for the children’s room or the house in general, while others have different uses and many times they even work.
That is why it is important to make it clear that rocket type you want to have whether it is considered an ornament or totally functional, since the materials to be able to carry out this task are different.
In case you just want make a paper rocket, It can be much simpler, because once the little ones learn, they can do it on their own, as in the case of paper airplanes, so they do not require as much supervision for their preparation.
Materials needed to make a paper rocket;
Paper that can be easily handled, preferably square
In this type of tasks you do not need glue, so if you need enough paper, in case an error occurs
Having the essential material for the elaboration of a rocket, you can start to work :
Step 1.- Cut a square of paper
A square must be cut out, the measurements will depend on the size you want for the rocket.
Step 2.- Fold the paper in half
Once you have the square, you must fold it in half, if the paper has any color on one side, that side will be inside.
Step 3.- Fold the bottom corners towards the center of the rocket
After folding it, it is opened again, and the lower right corner must be brought to the center. On the opposite side, the process must be repeated in the same way.
On the opposite side, the process must be repeated in the same way.
Step 4.- Turn the paper over and fold it again
The paper should be face down and both ends should be folded inward. It is necessary to slightly open the paper that has just been folded, opening it in the center.
Step 5.- Fold the bottom edge and excess paper
The bottom end should be folded up. With the excess on top, fold in on both sides, it should not reach the end
Step 6.- Fold the triangle that forms upwards
You have to pull up the triangle that has just been formed, since it will resemble the fire that rockets usually launch when taking off. And it will be ready to be used as a decoration or simply as a bookmark.
How to make a rocket with a bottle?
It is not always necessary to buy new materials to carry out an activity, because some of the things you have at home can be very useful like bottles.
For make a bottle rocket First, it is necessary to locate a bottle that is not in poor condition, in addition to being made of plastic, since this allows it to be molded more easily according to what is desired.
Keep in mind that no matter how safe the activity parental supervision It is always necessary, since many times you have to handle objects such as scissors, which can cause an accident if they are used irresponsibly or without the care they require. I deserved it
Materials needed to make a bottle rocket;
A plastic bottle preferably two liters.
Color paints
Scissors
Cardboard that can be from an old box
A cardboard tube that can be toilet paper.
aluminum foil
glue and tape
Once you have all of that, it’s time to start to work It won’t take much time, but it will keep the little ones entertained.
Step 1.- Decorate the plastic bottle with the appearance of a rocket
First, the preferred color is chosen and the plastic bottle is painted. With a marker you can make a circle and then cut it out to look like a window.
Step 2.- Make the cardboard wings
Determine the size you want the wings to have, trace their shape on the cardboard; then cut out the template and paint them the same color as the rocket.
Step 3.- Make the cone for the top of the rocket
With the paper tube is cut in half and a cone is made that will be the one that will go on top of the rocket, which can be fixed with adhesive tape or glue.
Step 4.- Use the rest of the cardboard to make the propeller
The remaining pieces of cardboard can be used to give the impression that it has a rib, and once assembled it is time to decorate it.
For more information on how to make toys and crafts for the little ones in the house, keep visiting my website We will always have updated information for you.
