For most men, knowing how to tie knot 👔, because while it is true that many do not usually wear these types of garments often, it is advisable to have the knowledge for when necessary.
In the case of executives, it is more normal for them to know tie the different knots since in most cases, due to their work, they require a suit and tie to participate in meetings, since this allows the person to show greater seriousness.
Although you might think that women should not have this knowledge, many times also useful because they can explain to their children how to tie a tie 👔 correctly.
It is important to keep in mind that throughout a person’s life it is normal for them to have to face different situations in which it is necessary to be able to have this information, in addition, it does not require great preparation, but rather certain clear points.
How to tie a tie?
For those men who I like to wear a tie but don’t use it because you think nodes are a problem, it is important that you know that with the right technique this can be done quickly.
Therefore, there is no need to spend hours trying to make them beautiful, one of the advantages of knowing how to make these we correctly is that they can be left for when the tie is worn.
This is very useful for those people who I have no time in the morning, so that will no longer be an excuse.
Step 1.- Choose the tie for the knot
You must choose the tie, you must know that it has two parts, one narrow and one wide.
Step 2.- Pass the wide part over the thin part (back)
The wide part should go over the thin part, it should be turned.
Step 3.- Turn the wide part in a circular motion and fit it into the remaining hole
The wide part will be at the same level as what is placed on the neck, at this point the wide part must be passed through the part of the neck and the circle that remains of the loop.
Step 4.- Adjust the node to your preference
Adjust it a little and voila, it is recommended to leave it a little loose and that it fits directly when the person puts it on.
If you want a little more information, you can check the following link :
How to tie a tie knot
How to tie the Windsor tie knot?
For many people, the type of windsor tie knot it is widely known as it has certain characteristics that are sought in a knot, some of these characteristics are elegance, symmetry and of course the flexibility to do so.
This node allows the person who uses it to transmit the image of being someone serious and responsible, its use is recommended when you want to close a deal and cause a good impression because it gives the other person the feeling that you are dealing with a serious person.
It is important to note that this node creates a triangular appearance .
Step 1.- Place the wide side of the tie over one shoulder
If you are right-handed, leave it on the right shoulder and if you are left-handed, leave it on the left shoulder, the wide side should be completely on this shoulder. and the narrow side should reach about mid-chest.
Step 2.- Pass the wide side through the narrow side
Take both sides of the tie with your hands, one with each hand, then pass the wide side over the narrow side forming a kind of “X”
Step 3.- Do the first lap
For that take the wide side that is on the narrow side and go under ie rolling, then bring the wide side from back to front, looking up and over the narrow side.
Step 4.- Make the second knot passing behind the first
The wide side facing you should now go behind the knot you made in the previous step. this is under the narrow side that you will be holding with your other hand and from the from left to right if you started the wide side from the right (step 1) or vice versa if you started on the left side.
Step 5.- Make the third knot on the second
Take the widest side of the tie and tie another knot over the previous one, turning, leaving two symmetrical knots, remember to always take the narrower side that holds the knots.
Step 6.- Go through the front of the previous knots
The wide side of the tie that will be on the right or left side depending on which side you have, pass it through the front of the two knots you just made, this before making the last knot.
Step 7.- Make the last loop until the final knot
After passing the wide side past the knots; grab it from behind to roll them all the way up, then bring the wide side up and into the space left in front when you did the twist; take the wide side down adjust the node as desired and you’re done.
How to tie a bow tie?
On many occasions it is necessary to use another type of style, for which there are ties which can take the form of a bow, this allows the person to look elegant but a little more informal.
It is very comfortable in most cases for young people or those who are about to get married, since in most cases this is the tie worn at a wedding since it is formal but maintains a pleasant appearance.
do this node type it can often be a bit tricky for people, so it is recommended to follow the steps below.
Step 1.- Measure the size of the neck
You need to take the bow tie and measure the size of the neck as it needs to fit.
Step 2.- Short side over long
It is necessary to cross the shorter end over the longer one.
Step 3.- Locate the long side at the intersection of both
After that, the long end should be located below the point where both ends intersect.
Step 4.- Bend the tip to form the curve
The hanging end needs to be bent so that a curved end can be formed.
Step 5.- Make the middle knot and voila!
After that, the center of the knot must be compressed so that it takes the form of a loop.
What are the types of tie knots?
There are different node types that can be used in ties, since one of the main functions of these is to show the person in an elegant and safe way, so it is convenient to know what variations they can have.
can be experienced from different paths so that the styles in each occasion are different, in this way people can have a different look according to what they want.
Some of the types of nodes that can be found are:
#1: Four in hand 👔
This is widely known for its simplicity, as it only consists of pass the tie on its own center so that it can be adjusted.
#2: Nude Windsor 👔
It is one of the most used, since it is related to royalty Although this knot was used for a special creation of the tie, but today the knot is widely known.
#3: Kelvin Knot 👔
This is very similar to the simple node, the difference is that it starts with backwards tie The steps that must be followed to make this node successful are:
Step 1.- Remove the loop seams
The first thing to do is turn the tie upside down, that is, the inside seam is on the outside.
Step 2.- Cross the wide part with the narrow part
You should take the wide part and cross it over the narrow part in front.
Step 3.- Pass another round of the wide part through the front part to adjust
Once the first row is ready, it is necessary to make another, in this the wide part must go through the neck of the tie and go through the front rows, since this allows it to be adjusted.
