Sharpen the Sawzall blade teeth to a point, running a tri-square saw file between each individual tooth.
The Sawzall® is an alternative chainsaw used for large construction jobs or home projects. A reciprocating saw can be corded or battery operated, making it a universal tool for many small and large jobs. They are easy to use, making them a great resource for the average DIY homeowner.
When choosing a blade for your Sawzall®, you must first consider the material you are cutting. A fine tooth blade is used for cutting metal and smoothing wood. Use a thick blade if you are working with rough woods. Using the wrong blade for the job can burn material and damage the reciprocating saw.
The blade is installed on the Sawzall® by lifting the release lever on the blade clamp. Insert the blade into the saw, shank side first. The blade is locked in place by pushing down on the blade clamp release lever.
When cutting wood, use an anchor to hold it in place and prevent it from slipping. If you are cutting metal, lubricate it with a thin layer of oil to prolong the use of the saw blade. Secure the wood to the bottom of the metal to prevent it from bending or breaking during the cutting process.
A Sawzall® is often used to fix things around the house. When doing this type of work, it is recommended that you turn off the power to the house and use a battery-powered reciprocating saw. This will prevent electrocution if you accidentally cut a wire.
Sharpening a Sawzall® blade results in a cleaner cut. This can be done by holding the blade teeth in a vise. Use a flat saw file to trim the tops of the blade teeth to a uniform height. Sharpen the blade teeth to a point, running a tri-square saw file between each individual tooth.
When the Sawzall® is not in use, remove the blade and store it in the case. Moisture can damage the electrical components of the reciprocating saw. Storing the reciprocating saw with the blade in place could damage the saw or injure an unexpected person.
Every six months, take your reciprocating saw to a tool service center for inspection, cleaning, and lubrication. This will increase the life of the power tool. The trigger switch on this device tends to get stuck when it becomes clogged with debris, causing erratic movement.