From ancient cultures, dream catchers meant a magical form of protection and impact on the meaning of dreams Therefore, their popularity has transcended from generation to generation and today they are still preserved as a relic in homes around the world. If you want to have your own dream catcher, you can make it at home using some materials, so we will tell you how to make a dream catcher.
How to make a dream catcher?
dream catchers are easy to make decorative pieces therefore, you can do it manually in the comfort of your own home.
Step 1.- Necessary materials
A hoop, it can be metal or wood, of the desired size
Fabric or leather strap
Clothespin
white wire or any color
Scissors
Tail
basins
Feathers
Step 2.- Cover the hoop with tape and wait for it to dry
Apply white school glue (preferably) along the entire length of the hoop and using the fabric or leather tape, proceed to cover the entire hoop; To do this, you can fix the end of the tape with a hanger and then cover it with circular movements, making sure that the tape does not come loose.
You have to leave a few inches unlined to make the final knot. Let the glue dry so that it is properly aligned.
Step 3.- Measure and cut the spider web thread
You go measure 4 meters of thread, cut and join the ends. Then, from the middle of the pair of threads, we tie the ring at the point where the dream catcher will hang, moreover, this will be the starting point for making the spider web.
Step 4.- Make the base by wrapping the thread around the hoop
There will be two tips or two tips, take one of them and start winding along the entire length of the hoop, just as we did with the tape, but this time you must leave spaces of 4 centimeters for each one. will allow you to specify the base of the mesh.
Step 5.- Weave the spider web in the hoop
Take a new thread and start making the inner spider web using the done previously as a starting base, you will go through levels until you reach a central point where there is a circle in the middle.
Your way of weaving is totally personal, you can search web templates and find your way around to facilitate the process.
Step 6.- Add some beads to the mesh and check the knots
Yes you are going to place accounts within the network , you must add them between each node. It is important that the knots are well made and tight, so as not to damage the point because it has become loose.
Step 7.- Decorate the ring and the mesh
Once you have your web ready, it’s time to decorate you can add beads and rhinestones to taste, because the idea is also to make a piece that is attractive and fulfills its function.
Step 8.- Add feathers to the dream catcher
Put the feathers, they go to the bottom of the hoop, For this you can fix them with a needle and thread or use small rings to join it to the main ring.
Step 9.- Tie a ribbon to hang it
use the leftover tape and the space you left when lining , tie a knot, so you can hang it wherever you want. Set up!
How to make a giant dream catcher?
EITHER the size of the dream catcher is determined by the size of the hoop, so if you want a giant one you will have to get a giant hoop and the procedure to use is the same for all cases, however we explain it in detail below:
Step 1.- Materials to use
Giant metal or wood border
clothes peg
Scissors
White glue
Waxed thread of the desired color
Feathers
imitation diamond
Step 2.- Line the dream catcher ring
Place paste the entire contour of the ring and proceed to cover with bodybuilder tape or other material. Being a giant, you have to line up slowly and correctly, avoiding letting go.
Step 3.- Cover a pendant with thread and gas to hang
Using the thread we will repeat the same procedure After the glue dries in the previous procedure, at the end you must make a knot so that you can hang the feathers on it.
Step 4.- Weave the dream catcher mesh
begin to woven dreamcatcher, For this you will use the wool that you wrapped around the hoop as a base, first you have to make knots around the hoop leaving 5 cm between them, then part of one of them and weave levels to finally finish in the center.
Step 5.- Decorate to your liking
Once you are done with all the mesh, you can tie some ribbons in the hoop and put rhinestones, colored feathers, among others; this to give more attention to the giant dream catcher
When the edge is big, spider web is easier to do so don’t worry, being bigger is easier.
How to make a dream catcher for children?
You The little ones are the most likely to have nightmares. so if you want to protect them and give them peaceful nights full of sweet dreams, you can make a special dream catcher for them based on the colors and shapes they love. The materials to be used are the following:
Step 1.- Materials to use
edge
Cable
Clothespin
White glue
colored ribbon
desired color yarn
Scissors
rhinestones and beads
colourful feathers
figures
Step 2.- Shape the wire the way you want
Using a pickaxe, Shape the yarn into a heart or star. which will be in the center of the hoop and will give a special touch to the little ones.
Step 3.- Tie the wire form to the hoop
Put the hoop and the heart or star in the middle, then take the yarn and make the first knot in the hoop, then stretch straight and in the same direction and knot the heart or star wire. You will repeat the procedure leaving 1 cm between each knot.
At the end you will see that the figure is in the center, as if it were trapped inside the ring.
Step 4.- Decorate with feathers and beads
measure three pieces of wire of the same length. Make a knot at the bottom of the hoop with each one and let it fall, at the end place the feathers and glue beads, rhinestones and figures along its length using hot glue, it will look like a bedroom mobile.
Step 5.- Make a pendant to hang the dream catcher
Finish off the decoration, and then make a string pendant at the top of the hoop. so you can hang it at any time.
How to make a dream catcher with recycled material?
You can also make your dream catcher with recycled material, using all the techniques and DIY. In this case, we’ll show you how to make one, using a paper plate . The materials to be used are the following:
Step 1.- Materials to use
a cardboard plate
cross
cold paintings
Yarn or thick thread
beads, rhinestones
Feathers
Step 2.- Make a ring with the cardboard
Cut the base of the plate. Circular once ready you will have a cardboard ring that will serve as a base.
Step 3.- Decorate with paint
proceed to paint it the desired color using cold paints and let it dry.
Step 4.- Make some holes
Right away, make holes with the hole punch around the ring, leaving 4 to 5 cm spaces for each hole.
Step 5.- Weave the dream catcher net
Take the thread and give it a knot in the first hole, extend the thread through the center of the hoop to the parallel hole and tie a knot. Do this process until all the holes are filled. You will see that a network is formed.
Step 6.- Rhinestones to decorate
go putting beads and rhinestones to decorate you can stick them with hot silicone.
Step 7.- Add some feathers
Knife three consecutive holes on the edge separate them from the net from the hoop and hang your feathers there using thread or metal hoops. Otherwise, you can hot glue the feathers directly to the cardboard.
Step 8.- Finish with a pendant to hang on the wall
Knife a hole at the top and with a thread or with the same thread make a pendant to hang the dreamcatcher in the bedroom. Set up.
Where should a dream catcher be placed?
Dreamcatchers, being objects related to sleep and rest, must be placed inside the room, as close to the bed as possible. It does not matter if it is an adult, a child or a baby, you have to position it in the room.
There are people who use them as decorative elements in any corner of the house and they are even placed as accessories that people carry with them everywhere, however, in this way, according to beliefs and experts, they do not generate any impact or fulfill their function. .
Is better place it at the head of the bed or hang it from the ceiling because as we know, positive energies descend towards the feathers, therefore they should never be placed at the foot of the bed or under our head.
In addition, you must make sure it is in a place where it gets natural light where the first rays of dawn illuminate you, since they are the ones that remove bad dreams, clean the dream catcher and charge it with energy, so you can place it near the window.
Finally, to fulfill their function, the dream catchers It must be in perfect condition, it must receive light, be clean and well cared for. so that they can work during the night without inconvenience.
What type of yarn is used for dream catchers?
EITHER the thread used in its elaboration varies according to the model and even with culture. Currently they use artificial threads in all their geometry, combining colors and shapes to give a more modern look.
However, the original dreamcatcher is made with natural cotton yarn in the shape of a spider web while the leather or suede thread is placed around the entire circumference of the rim.
What are dream catchers like?
Dreamcatchers consist of a ring that is adorned with a rope and beads inside there are one or more wires arranged in the form of a spider web and it has feathers anchored to the ring at the bottom.
You The manufacturing materials are very diverse, although they usually use a metal ring, natural bird feathers and cotton thread inside, which establishes the complete analogy of a spider web.
What is a dream catcher and what is it for?
Dreamcatchers are nothing more than a circular ethnic object on which a network of fabric threads is formed, in the form of a spider web and decorated with beads and feathers. It has its origin in the native peoples of North America, called Ojibwa. . However, it remained especially in Western culture, although it is also known in the old continent.
The name of the dream catcher. comes from the English “dreamcatcher or dream hunter” which translated into Spanish means “dream hunter”. In the language of the Ojibwa people, they were called “asabikeshiinh, or bawaajige nagwaagan,” which translates to spider or dream trap.
In turn, in the Lakota language, they were known as “iháŋbla gmunka”.
That the object is used as a dream catcher that is to say, it lets only positive dreams pass and leaves negative dreams trapped in its spider web, which disappear at dawn.
However, for the “Lakota” people, dreamcatchers work backwards that is, the good dreams stay in the hammock and the feathers descend towards the person sleeping below and the bad ones go through the hammock and continue.
Finally, these dreamcatchers in other cultures serve as protective objects against negativity and they even allow reaching the goals that are proposed, since dreams are compared with the aspirations and desires of the person, in such a way that they imprison these good energies and project them within reach of their dreams.
For this and other information, I invite you to continue enjoying the content that we will publish on our blog .
