A dispenser is a object that allows you to store anything , is a concept that is used in food, drinks and even games, but how to make a dispenser? Whatever your need, it is about making an airtight structure that prevents the content from escaping and, at the same time, can keep it in good condition.
Next I will show how to make assorted dispensers that is, they have different objectives to maintain.
How to make a dispenser in Minecraft?
Minecraft is without a doubt one of the most popular games That’s why if you’re a fan I’m going to tell you how to make a dispenser for Minecraft using console mode or PC mode.
Technique #1: Dispenser in Minecraft from a console
When you are playing on console in survival mode, you can make a dispenser to use on the floor when you need it.
The materials to use:
red stone prayer (Look for coordinate Y16 with an iron pickaxe)
7 gray rock blocks
3 rolls of thread you can get each unit killing a spider
wooden trunk
1 Artboard (If you don’t have to do it previously using another register)
If you use an XBOX
Step 1.- Go to the craft workshop using the X button
press the X button to go to the craft workshop Select the plates and press A.
Step 2.- Create a group of sticks with the A button
Use the cursor and place to the right of the wooden board and press A to create a group of sticks
Step 3.- Close the inventory and go to the workbench
Close the inventory by pressing B . Go to your desktop. If you don’t have it, you must press X, choose the clipboard icon and press A.
Step 4.- Go to the tools and weapons area by selecting the bow
press the upper right shutter button , this will take you to Tools and Weapons. Select the Arc and press A.
Step 5.- Open the mechanisms tab
The same button as before (the one above the right trigger) press it three consecutive times to open the “Mechanisms” tab
Step 6.- Find a funnel and the dispenser
Find a funnel and use the left stick to move the cursor to choose top dispenser
Step 7.- Take it to the inventory
press A and take the dispenser to inventory.
In case of using PlayStation 3 or 4
Step 1.- Select the tables in the manufacturing menu
Press the square button and access the crafting menu . Select wooden boards and press A.
Step 2.- Close the inventory
Move your cursor to the right side of the wooden planks and press X. Press the command circle and close inventory
Step 3.- Go to clipboard
Go to the drawing board, if you don’t have it, square it, select the artboard and press X
Step 4.- Select the bow in the tools and weapons menu
Press the button above the right trigger to open the Tools menu and Weapons, select the bow and press X.
Step 5.- Open the mechanisms menu
Then press this button on the right trigger three times to open the mechanisms menu,
Step 6.- Go to the funnel to select the dispenser and it will be in the inventory
Go to the funnel and with the lever, point the cursor to the dispenser and press the X button. Dispenser will appear in inventory.
Technique #2: Dispenser in Minecraft from PC
Then, you must be in survival mode to do it.
The materials to use :
redstone Ore, if you don’t have it in your inventory, you can mine it with an iron pickaxe at Y coordinate 16.
7 gray rock blocks
3 wires in this case you have to kill 1 spider per roll of thread, that is three in total, it is also advisable to look for it during the day, since they are more difficult to kill at night.
wooden trunk
1 work table that in case of not having it, you have to cut 1 more trunk.
Step 1.- Enter the creation menu and then go to your inventory
open your crafting grid . Press E to enter your inventory and drag a wooden log towards it, you will see that 4 wooden boards are formed that you must take to the inventory.
Step 2.- Go to your clipboard
go to your bank . If you don’t have it, what you have to do is that in the previous step you make 8 wooden boards from the 2 logs. Save 4 for the next procedure and the remaining 4 create an artboard. Simply by placing a card in each slot on your crafting grid.
Step 3.- Make your group of toothpicks
so you have to make your group of sticks To do this, in the same crafting grid you must place a table in the central box and another one below it, you will see that four sticks will be formed that you will transfer to your inventory.
Step 4.- Make an arc in your 3×3 square
In you 3×3 space, make an arc . In this case, you must place the following elements:
put three strings vertically in the third or right column.
put three sticks : the first in the central square of the first row, another in the central square of the first column and the last in the central square of the third row.
Step 5.- Start making the dispenser by placing the bow in the center
Now we started to make the dispenser . To do this, you must place the arch in the central square of the grid and then place stones in all the squares of the right column, left column and top row.
Step 6.- Finish with redstone dust and take the dispenser to your inventory
In the only space available (Under the arch) put a red stone powder. You will see that the Dispenser will appear in the results box, it is like a box with a black hole, you can save it and use it at the desired time on the ground.
How to make a bag dispenser?
this is one of The easiest dispensers to make. You don’t need much to store your bags.
The best option is to find a plastic container with lid like soft drinks or large waters, we cut the base and that’s it. Full of pockets at the base and at the tip, you pull on and off.
you can even get a shoe box or tissue box make a rectangle on the lid and take your bags.
How to make a dog food dispenser?
Tired of not having a place to store your dog’s food? We will show you a technique to make a cardboard dispenser with materials you have at home.
The materials to use:
Card
A cylindrical container with lid about 3 inches
rectangular wood chips
Scissors
liquid silicone or strong glue
hair tie
Pliers
Step 1.- Cut out 4 truncated cardboard pyramids
To get one Cardboard square 12 cm x 12 cm draw a truncated pyramid and cut it out. Make 4 pyramids with this.
Step 2.- Join the pyramids by the sides
enjoy the pyramids by the lateral edges forming a three-dimensional truncated pyramid with 4 faces.
Step 3.- Make 4 small wooden bases
with the pliers cut 1 piece of wood of 1 centimeter and another of three, glue one on top of the other forming a base. You will make 4 of these bases and place them at the base of the truncated pyramid, one on the side and 2 on the top.
Step 4.- Form a cylinder with cardboard and join it to the bases
To get one cardboard rectangle and with the help of a pencil roll it up to form a cylinder and on one of its ends glue a square of cardboard, on the opposite end of the cardboard place some wooden bases (using the previous process) 2 in each corner.
Step 5.- Hook a pair of rubber bands that go from the cylinder to the base of the pyramid
Take two rubber bands, you go attach the first one to the attached wooden base to the cylinder and stretch to the wooden base of the upper part of the pyramid and the second using the same process but on the opposite side, in this way a door will be formed that opens and closes when pulled
Step 6.- Cut the faces of a box and open a hole in one of them
Cut 4 rectangles and two cardboard squares (to form a rectangular box) on one side make a circular hole to insert the cardboard cylinder.
Step 7.- Mount the cylinder and mount the box
take the pyramid, place it on top pass the cylinder through the hole and glue the side and back faces to form the box.
Step 8.- Make a rectangle in front of the box
THE front face you have to make a rectangle just below where the pyramid ends.
Step 9.- Fix a cardboard tray in the rectangular hole
To get one cardboard rectangle and glue two thin strips of cardboard on the sides perpendicularly and insert it into the rectangle you made in the opposite box (the food will come out here) and fix it with silicone
Step 10.- Paste the front face and open the lid space
Glue the front face. At last, take the lid of the container and mark it On one of the cardboard squares (box lids), cut out this circle and glue the lid to this hole in the cardboard.
Step 11.- Fill the food dispenser and use it, ready!
Fill the container with dog food, cover and stick the whole structure on the cardboard with the lid, after it dries, you turn it over and that’s it, just press the lever and the food will come out.
How to make a cat food dispenser?
you can use the dispenser model mentioned above however, if you want something different, try two plastic bottles.
What you have to do is to cut the base of a bottle and mark this base on one of the bottom sides of the other bottle and cut it to the same size, then join the two L-shaped bottles together and voila, filled with food at one end and ship at the other.
That’s it, the dispensers are important in our daily life so we invite you to use your creativity and simplify your life.
For this and other information, I invite you to continue enjoying the content of your website .
