How to make a tutu?

Tutus are common garments for dancers and that as a child they did not want to be and even as an adult, this skirt is famous because it can be worn by adults and children, in fact it has become A fundamental piece of the wardrobe of many women or part of the princess outfits of the girls of the house.

Be that as it may, if you want to know how to make a tutu you have come to the right place, in this article you will find everything you need to know, Super easy and practical ideas, so you can do it with your hands, so don’t wait any longer and learn with us how to make a homemade tutu .

Table of Contents

How to make a tutu?

Being a dancer is the dream of many girls, mainly because at this age they are discovering their favorite habits and one can be dancing. or simply because it is a piece that attracts attention, makes them feel like princesses, whatever the case may be. At some point they will want a “tutu” and in this section we will tell you the steps to do it.

See also  What is Container?

The materials to use;

6 meters of tulle in the color of your choice (measures for a girl of approximately 10 years old)
tulle colored yarn
elastic waist
Sewing machine
Scissors
Decoration accessories (ribbons, flowers, diamonds)

Step 1.- Measure the width of the tulle

You must take into account that the width of the tulle is at least 1.5 meters; this is different from the length as it must be 6 meters ; the width is important as it will determine the length of the skirt.

Step 2.- Fold the tulle in 4 layers

Now you have to fold the tulle fabric in half on the long side and then fold it again, so you will have a 4-layer tutu that will give you more volume

Step 3.- Take the measurements of the girl using the elastic

Take the elastic band and measure your girl’s waist size with it, keep in mind that you should not stretch the elastic too much, but also do not leave it loose, make sure that it fits you perfectly, but do not tighten. Once you have the exact measurement, cut the elastic with scissors .

Step 4.- Mark the edge of the elastic not the tulle

Measure the width of the elastic (must be no more than 5 cm) and then down that distance from the top edge of the tulle (fold area) .

Step 5.- Sew along the edge to separate the skirt from the waist

Where the 5 cm are marked, from there you must sew a straight seam along its entire length (6 meters) using the sewing machine , if you don’t have it, you can do it by hand; keep that in mind the seam should go through all 4 layers of tulle .

Step 6.- Sew the elastic to the waist of the tutu

It’s time to sew the elastic to the tulle, to do this secure one end of both the skirt and the elastic with a crochet hook, then sew stretching the elastic a little, as it should cover the entire length of the skirt .

Step 7.- Gather the ends of the elastic to close the tutu

You must join the two ends of the elastic, to do this make a straight seam 7 mm after the edge and so you would close the waist of the tutu skirt.

Step 8.- Sew closing the tutu skirt

Sew the back of the tutu closed completely, you will notice because there is a slit in the skirt. make this seam 6 mm from the edge of the fabric and make sure to sew all 4 layers .

Step 9.- Decorate the tutu

Finally, decorate the tutu with a ribbon bow at the waist or add a flower necklace around the waist.

How to make a tutu with elastic?

The tutus with elastic are quite practical, by the way, elastics fit better at the waist, so it is much more comfortable for girls to wear in any occasion; so if you I want to make a tutu with elastic In this section you will find all the instructions you must follow:

The materials to use;

3 meters of tulle if the waist is less than 50 cm, if it is greater than 50 cm 4 meters
Measuring tape
1 meter of elastic
Scissors
Needle and thread

See also  what is oscillating

Step 1.- Measure the waist of the person who is going to wear the tutu

Measure the waist of the girl who is going to wear the tutu, for that use the tape measure, then take this measurement to the elastic, cut and sew to join the two ends of the elastic.

Step 2.- Measure and cut the pieces of tulle

Cut 4 pieces of tulle fabric, 30 cm wide and the length will correspond to the meters of fabric you buy, then take two and place one on top of the other.

Step 3.- Sew two seams along the tulle

Now sew along the two pieces of tulle, then sew again 1 cm from the first seam but do not knot or cut the sewing thread.

Step 4.- Join the tutu by pulling the sewing threads

Now pull this thread until the tutu comes together and repeat the process with the other two pieces of tulle.

Step 5.- Stretch the elastic to sew it to the tutu

put the elastic on a chair or cardboard where you can stretch to the waist and start sewing the tulle fabric on top to assemble the tutu.

Step 6.- Sew the elastic to the tutu with individual stitches

A sew, make a knotted stitch and cut the thread also loosen the threads of the tutu so that the piece covers the elastic, without stretching too much so as not to lose the shape of the fold.

Step 7.- Cover all the elastic with the seam

Then repeat this procedure covering the other half of the elastic, remembering that the distance you must leave with the points is 1 cm.

Step 8.- Add some accessories

Finally, if you want, you can decorate with accessories. and so the tutu will be ready.

How to make a double layer tutu?

Another very practical idea is to make a tutu in layers, like this more variety to the new skirt of the little one of the house, combining different colors, greater volume and striking appearance, so in this section we will teach you all the steps you must follow.

The materials to use;

2 pieces of tulle fabric 90×90 cm, one cream and one black
1 meter of elastic 2.5 cm wide
Needle and thread
Scissors
shiny gold
Silicone or instant glue

Step 1.- Cut two pieces of light colored tulle

Start by cutting the tulle fabric, take the lightest one, fold in half, cut and in the end you will have two pieces of 45×90 cm .

Step 2.- Divide the pieces into 18 strips

Divide and cut each piece into 9 strips of fabric 10×45 cm, in the end you will have 18 strips of tulle with these measurements.

Step 3.- Cut the black tulle and save half

Take the black cloth and cut it in half, keep one, stay with the other; fold the fabric lengthwise, i.e. horizontally, you will have two halves of 22.5×90 cm and then cut.

Step 4.- Cut 18 strips of black tulle

Two pieces of fabric 22.5 × 90 cm You have to cut 18 strips of 10 × 22.5 cm ; that is, 9 of each.

Step 5.- Arrange the layers of tulle

Lay the 18 strips of sheer tulle on the surface you are working on, place them next to each other, then take the black strips, place them on top of them, one on top of each other and they should line up in the center.

See also  What is violence?

Step 6.- Take the measurements of the waist of the tutu

Measure the waist of the tutu, To do this, use a tape measure or wrap the elastic around the girl to take the measurement, remember that it should not be too loose or too tight.

Step 7.- Sew the elastic and stretch it on a cardboard

Once you have this measurement cut and sew with needle and thread ; then stretch the sash over a chair, a piece of cardboard (do not stretch the sash more than its size) and start assembling the tutu.

Step 8.- Insert the strips of tulle under the elastic

Take a piece of light and dark tulle holding them together so they don’t come loose, then insert the strap under the elastic and pull until the ends of the straps line up.

Step 9.- Tie the tulle to the elastic

Tie the elastic so that the ends of the short and long strips are facing down in two different layers. be careful not to tighten too much so as not to dent the elastic, and repeat this process until it is completely covered.

Step 10.- Decorate the tutu with glitter

Finally, add gold rhinestones throughout the length of the tutu. you can stick them to your waist or, if you prefer, to each of your suspenders, and voila!

How to make a ballet tutu?

Ballet tutus may seem complicated to make, however, they are easier than you think, for it It just takes a little effort, creativity and ingenuity, and it’s a very special gift for girls. feel like home. In this section you will find all the steps you must follow.

The materials to use;

6 yards of tulle in different colors or one color
15 cm wide elastic
Sewing machine
Needle and thread
Scissors
Large adjustable plastic hoops or plastic rods
Candle
Decoration, fabric ribbons, flowers, diamonds, among others

Step 1.- Fold the tutu horizontally

Fold the tutu horizontally several times until it is about 15 cm wide. and pins throughout the fabric.

Step 2.- Cut several pieces of different sizes

cut as follows, 3 pieces of 10 cm long, 5 pieces of 15 cm long, 2 pieces of 20 cm long, 5 pieces of 25 cm long, 2 pieces of 30 cm long, 5 pieces of 35 cm long and 2 pieces 40 cm long .

Step 3.- Join the ends of the pieces that have the same size

Now join the ends of each piece separately. that is, first the 3 of 10 cm then join the 5 of 15 cm until all are finished, in the end you will have 7 pieces of tulle of different sizes .

Step 4.- Sew the edges to gather

Machine sew the entire edge of each one, with the intention of pulling the thread and gathering the fabric to shape it. then sort them by size from the largest layer of fabric at the bottom to the smallest.

Step 5.- Take the measurements of the waist of the tutu

Measure the waist of the girl who will wear the tutu wrapping it with the band, once you have the short measure and sewing with a machine or with a needle and thread.

Step 6.- Sew the first piece of tulle to the elastic in a zigzag pattern

It’s time to sew the pieces of tulle to the elastic, for this you must use the zig-zag sewing machine; Start with the smallest piece and sew 1 cm from the edge of the elastic, leaving another cm of edge for the tulle.

Step 7.- Zigzag the rest of the layers and sew the other side

Sew the second piece right on top of this one and repeat the process until you reach the largest piece, When you’re done, turn the larger layer of fabric over and sew back over the first seam.

Repeat this process until you reach the smallest piece of tulle, then cut the excess threads.

Step 8.- Pass the tutu to form a plate

Lay the tutu out in a flat circle. and start ironing to give it the characteristic plate shape, do it at very low temperatures, otherwise you can damage it and burn it.

Step 9.- Make the frame of the tutu

To make the frame of the tutu, use long plastic rods. and if you don’t have them, put some together by melting their ends with a candle; then, with the remaining tulle, sew a lining with which you will cover the stems and insert them into it.

Step 10.- Place the frame on the tutu

You must have two big rings, the first one should go in the penultimate layer of tulle and another medium size should go in the middle of the skirt, adjust its size well before attaching them to the fabric.

Step 11.- Reserve the smallest layer of the tutu to sew the rings

It’s time to sew the rings on the tutu For this, hide the first layer inside the elastic, since it will cover the rest and you do not want to sew it by chance.

Step 12.- Sew the hoops of the frame to the tutu

Then put each of the racks in place. and start sewing by hand, inserting the needle under the ring at the top and removing the needle at the other side.

Step 13.- Do not make a continuous seam

Sew 10 stitches, tie a knot and start over this is important because if a seam comes loose, it doesn’t come undone completely.

Step 14.- Remove the layer you hid, decorate and voila!

Once this is done, remove again the layer that you hid inside the elastic and covers the rest of the structure of the tutu, finally you can make a bow with fabric ribbon and add it as decoration.

In this way we come to the end, we hope that all these ideas will be super useful for you to make a tutu with your own hands, We remind you that you can continue enjoying all our content in future publications, we are waiting for you .

Related Posts